I have a router that is receiving updates from a site router with an AS I want to replace. I have used remove-private-as and this works but I need to see it I can get as-override working. I have the following; Router 1 (10.5.5.1) > Router 2 (10.5.5.2) > Router 3 (10.35.3.74)
Router 2 is to remove the AS of Router 1. I have the following config in Router 2 router bgp 2856 no synchronization bgp router-id 10.5.5.2 bgp log-neighbor-changes no auto-summary ! address-family ipv4 vrf cc redistribute connected redistribute static neighbor 10.5.5.1 remote-as 64537 neighbor 10.5.5.1 activate neighbor 10.35.3.74 remote-as 64603 neighbor 10.35.3.74 update-source FastEthernet0/1 neighbor 10.35.3.74 activate neighbor 10.35.3.74 as-override no synchronization exit-address-family I have tried the as-override on both neighbor statments and neith works. I have two questions, 1. On which neighbor statement do I put as-override 2. Is there anything missing? Thanks Regards Gary _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
