Hi MKS does your EOS ESP supports Link capacity adjustment Scheme (LCAS) ?
if yes , so its SNMP MIB should contain some objects about links failures and restoration so you can monitor these condition via SNMP Traps . best regards --Abo Zaid On 4/23/08, MKS <[EMAIL PROTECTED]> wrote: > > Hi list > > We are getting N times STM-1 connections delivered over GbE (SDH > network). Currently we are running MPLS-TE over these GbE for > loadbalancing. > The problem is that we have seen failures where we loose part of the > capacity, e.g. loose 2 STM out of 4, and we are unable to detect this > failure, just a flatline when looking at mrtg graphs. > The obvious flaw in this scheme is that QoS basically stops working, > since my equipment sends more high priority traffic than is available. > One way of solving that is to have QoS also on the SDH GbE. > This kind of failure is something that I would like to detect but > don't see how it can be done. I don't know the capabilities of the SDH > GbE equipment. > Is there a creative network engineer out there that has a solution for > this problem? > > Regards > MKS > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
