Greetings, This is one of those questions that may seem obvious to others but the answer just isn't apparent to me. I have a Catalyst WS-C3524-PWR-XL at a site with the default VLAN 1 and an IP on it for management. I don't have console access to it at this time.
I want to change the default VLAN to 122 and put an IP there so I can manage it on a different VLAN. Once I do: interface VLAN122 ip address 192.168.122.250 255.255.255.0 no ip directed-broadcast no ip route-cache shutdown ! it immediately shuts it down. I've tried a no shut as well as shutting down VLAN 1 (had to do a reload in 2 to make sure it would come back). Any ideas how to change the default VLAN remotely or do I have to do this from the console? Thanks, Jason _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
