Whisper wrote: > How would you go about testing if it is the NAT causing > all the CPU usage would be a good question to have answered?
Disable NAT? :-) If only having one IP address (on the dialer interface) is an issue then one might configure private address space on the inside interface and use something like ttcp to pump out UDP traffic to an unroutable (beyond the ISP's first hop) address while measuring the CPU usage. One might also try routing between Ethernet interfaces (or SVIs) on the router with and without NAT enabled. Regards, Brad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
