I have written blog to your asked question about Netflow packets collecting/forwarding issue...
http://weblogs.com.pk/jahil/archive/2008/05/02/how-to-netflow-with-csico-650 0.aspx Regards, Masood A Shah -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Drew Weaver Sent: Thursday, May 01, 2008 7:47 PM To: [email protected] Subject: Re: [c-nsp] If BGP is running on a circuit, if you ping the other end you get loss. kill the BGP (and thus the traffic..) no more loss. Somewhat related to this thread, Is there some sort of 'magic' you have to do with a Sup720 to get it to export flows egress and ingress? It appears that there is quite a bit of traffic "missing" from the NetFlow data (most of it infact)... I simply applied ip route-cache flow to the layer3 vlans of interest and then setup the export commands as documented. Are there other steps required? Thanks, -Drew -----Original Message----- From: Aaron Glenn [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 30, 2008 7:44 PM To: Drew Weaver Cc: [email protected] Subject: Re: [c-nsp] If BGP is running on a circuit, if you ping the other end you get loss. kill the BGP (and thus the traffic..) no more loss. On Wed, Apr 30, 2008 at 5:54 AM, Drew Weaver <[EMAIL PROTECTED]> wrote: > > So, what are folks using these days for NetFlow analysis (software?) > nfsen and pmacct. excellent open source products. aaron.glenn _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
