Chris Conn <[EMAIL PROTECTED]> writes: > Roy wrote: >> A client has a 7206VXR that we are attempting to just upgrade the NPE. >> When we replace the NPE-300 with an NPE-400 we get a crash loop during >> the boot. The OS we are using is >> >> Cisco IOS Software, 7200 Software (C7200-P-M), Version 12.4(8d), RELEASE >> SOFTWARE (fc2) >> >> Console log follows. Any ideas welcome. >> >> Roy > > Hello, > > Check your bootflash. You may have to upgrade it to a newer version > that can recognize the NPE-400.
Yep, that's almost certainly it. It is *amazing* the amount of trouble people have with 7200s that is directly traceable to the bootflash being wildly out of sync with the running IOS load. Not that I've ever picked up "malfunctioning" VXRs on the cheap that turned out to work fine after getting re-flashed <whistles innocently>... -r _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/