George, I guess you're referring to snmp traps (not syslog entries).
If yes, try "no snmp-server trap authentication acl-failure". Otherwise, i would be interested to see these syslog entries. -- Tassos Koffler, George A. wrote on 3/5/2008 6:58 πμ: > Jeff, > > I've noticed that, unlike other ACLs, I receive syslog entries for denied > *SNMP queries* even when an SNMP ACL is the reason for the failure. It looks > just like a failure due to an incorrect community string. The ACL isn't set > to log. > > I hadn't really thought about it until I saw your question, but now I'm > intrigued... > > George Koffler > UMKC IS Networking & Telecommunications > >> >> > Date: Fri, 2 May 2008 17:05:50 -0400 > From: Jeff Fitzwater <[EMAIL PROTECTED]> > Subject: [c-nsp] snmp access list > To: [email protected] > > Does anybody know how a numbered standard ACL that is applied to snmp > traffic via commands shown below, actually works? > Does the SNMP process still get touched when a DENY is hit? > > > snmp-server community xxxx RO 99 > snmp-server community xxxx RW 99 > > > > Thanks for any info. > > > > Jeff Fitzwater > OIT Network Systems > Princeton University > > /> > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
