Although the operating mode of a 7606/RSP720-3CXL (12.2(33)SRB2) is PFC3BXL
(due to a 3BXL card), i can see 96k as the maximum
number of mac-addresses on the SUP, which means i'm not loosing one of the
advantages of 3CXL mode. Am i missing something here?
7606#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 48-port 100FX SFP Ethernet Module WS-X6148-FE-SFP xxx
4 24 CEF720 24 port 1000mb SFP WS-X6724-SFP xxx
6 2 Route Switch Processor 720 (Active) RSP720-3CXL-GE xxx
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
4 Distributed Forwarding Card WS-F6700-DFC3BXL xxxxxxxxxxx 5.3 Ok
6 Policy Feature Card 3 7600-PFC3CXL xxxxxxxxxxx 1.0 Ok
6 C7600 MSFC4 Daughterboard 7600-MSFC4 xxxxxxxxxxx 1.1 Ok
7606#sh platform hardware pfc mode
PFC operating mode : PFC3BXL
7606#sh platform hardware capacity forwarding
L2 Forwarding Resources
MAC Table usage: Module Collisions Total Used %Used
4 0 65536 139 1%
6 0 98304 82 1%
--
Tassos
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
