http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftvpdnmh.html
This seems to be what you are looking for, except it looks like you already did this. hmm.... Nathan wrote: > Hi, > > I have PPP over L2TP arriving on a router on a dedicated interface, > and radius tells the router in which VRF to place the PPP connection; > so far so good. > > I would like to have the network on which the L2TP connections arrive > placed into a VRF. The IP address that the L2TP sessions are > established with would be in a VRF. Of course the PPP connections must > still arrive in the same VRF as before. Radius requests could be made > using the global table or in the L2TP vrf, it doesn't matter to me. > > The reason for this is that the L2TP tunnels are coming from a network > that should not be accessed by my clients, and by very few of my > routers, I'd prefer to keep it apart. > > On a hunch I tried setting a "vpn vrf XXXX" in the vpdn group, but it > doesn't seem to be that simple. > > Is this easily done / well tested / well supported enough to be used > in production? > > Thanks, > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
