VACL Capture on OSM/SPA/LAN interfaces or even SPAN on LAN interfaces should work fine.
What info does the server receive when it arps for a remote address. I'll assume that both ends have a /30 configured, and you aren't attempting to use Proxy-arp. -- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Rafael Rodriguez > Sent: Thursday, May 15, 2008 7:34 PM > To: [email protected] > Subject: [c-nsp] Set a L3 routed interface on a 6500 + SUP2 > to 'promiscuous'mode? > > Hello all, > > Here is the issue I am facing: > > We have a server that need to send lots of data to IP addresses not on > its local subnet. Server will be directly connected to > router interface > via ethernet. > The server SHOULD set ALL packets with a dst MAC Address of the router > (its default gateway) so the packets get delivered to the remote > subnets. > The server DOES NOT do this... grr. > > Is there a way to have router interface process all packets > that arrive > on this interface (includes packets that don't have interface MAC > Address as dst MAC Address)? > > All of these packets are destined for remote networks. Thanks. > > Cheers, > > RR > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
