Jarrod Friedland wrote: > Can I run a 6509 with 1 x 1300W and 1 x 1800W (redundant)? Are the issues > with doing this we should be aware of? I have asked this question of cisco > integrators however all we get is "The engineers have put their heads > together and say NO"
My understanding is YES, with the notion that you'd only have the output of the 1300W (1152W IIRC) available to the system, but that shouldn't be a problem for you at this time. Caveat: I have had three 6509s fry simultaneously (ALL ports "inactive") due to DC power issues (it's the only logical conclusion I can draw from the facts available); the only thing thought to be good once the dust settled was the power supplies. The cards showed ports 'inactive' when inserted into known-good chassis, the sups showed ports 'inactive' locally and on known-good linecards when inserted into known-good chassis, and the chassis showed ports 'inactive' when loaded with known-good cards. So you may want to take my advice with a grain of salt. ;) pt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
