>Jeff wrote;
On a somewhat related note... we have a 6509 that was "somehow" originally wired for 110v, so we're only getting half the power rating out of them. I have new 220v mains, plugs, and cables ready... can they be bumped over one at a time hot, or does it have to be down cold? I had the same scenario, the key factor is the sup - if you have sup 720 the sup, fans and blades require more wattage than the 1300 watt power supply can provide, the switch failed in our case when we attempted to roll one power supply over to the 208VAC source. Once we had one 208 VAC source and the resulting 2500 watt power supply in place the switch fired back up and we then swapped sources in the other power supply with no further ill effects. With sup 2's we had no troubles upgrading one (power source) at a time. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
