They work fine on SXF too ;)
6509>sh mod 3 Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX xxxxxxxxxxx Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 3 xxxx.xxxx.xxxx to xxxx.xxxx.xxxx 2.6 12.2(14r)S5 12.2(18)SXF8 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 3 Distributed Forwarding Card WS-F6700-DFC3CXL xxxxxxxxxxx 1.1 Ok Mod Online Diag Status ---- ------------------- 3 Pass -- Tassos Marian D(urkovic( wrote on 29/5/2008 10:23 πμ: > On Wed, 28 May 2008 15:12:46 -0400, Jay Young wrote >> Can anyone confirm if the DFC3CXL is supported on: >> >> WS-X6704-10GE >> WS-X6748-SFP >> >> I thought they were support on all CEF720 cards but >> >> > http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Module_Installation/Mod_Install_Guide/0adtrcrd.html >> seems to indicate they are not. > > They are not supported on those modules with IOS 12.2(18)SXF* > They are supported with IOS 12.2(33)SXH* > > M. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
