On Fri, 30 May 2008, Everton Diniz wrote:
Hi all,I´m trying access to a msfc card through session <mod> command, but the access is not authenticated. The access via network its ok. What´s missing in config of MSFC? aaa new-model aaa authentication login default group radius local aaa authentication enable default group radius enable aaa authorization exec default group radius none
Have you tried replacing the above with: aaa authorization exec default group radius local ?
aaa authorization network default group radius none aaa accounting exec default start-stop group radius line vty 0 4 exec-timeout 30 0 password 7 xxx transport input telnet ssh Tks all, Everton _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
James Smallacombe PlantageNet, Inc. CEO and Janitor [EMAIL PROTECTED] http://3.am =========================================================================
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
