Some pointers: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/na tive/configuration/guide/qos.html#wp1726124 http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m2.html#wp 1016198
In general, you enable "mls qos vlan-based" on the trunk, and apply the qos policy on the SVI (interface vlan) - even without any L3 config on the SVI. Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cheikh-Moussa Ahmad Sent: Friday, June 06, 2008 17:44 PM To: [email protected] Subject: [c-nsp] QoS VLAN trunk Port Hi! I have a general question to QoS VLAN based. I have read a lot of documentation, but did not found the right answer. Is it possible to police traffic on an trunk port per vlan ? For Example, I want to limit vlan 100 to 5Mbps and the vlan 200 to 2Mbps, vlan 300 is unlimited. 4500 <--Trunk vlan 100,200,300 --> 4500 Is this possible ? If yes, what is the name of the feature and how to configure ? Regards, Ahmad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
