It depends on how many customers you have that you'll use ISDN for. Since you stated a T1 is too expensive for the customer loop, I'm going to assume you're refering to a BRI at the customer premise.
Since ISDN is a switched solution, the customer's equipment will need to be configured to 'call' yours. You'll need some type of access server (as5300/5350/5400) with (a) PRI line(s) from your carrier to terminate the calls. You could also use BRI lines at your site, but you'd have to manage multiple modems/lines/numbers/etc. It's just cleaner to use an access server. Joe On Mon, Jun 9, 2008 at 1:51 PM, root net <[EMAIL PROTECTED]> wrote: > Hello, > > I am not sure if this question has been asked before if so I apologize. I > was wanting some advice on aggregation. I have some customers that want > broadband but can not receive in this even T-1 or ISDN is an option. Of > course a T-1 is too expensive for the home user and the only option for us > to provide the bandwidth to the customer is via an ISDN PTP loop. There > are > maybe 10 to 15 wireless is not an option to to inform them about this to no > avail. How can we bring in the PTP ISDN lines on one circuit on our side, > T-1 possibly? > > For example like DS-3 for T-1s. > > --rootnet08 > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
