Hello, n 6/11/08, Zahid Hassan <[EMAIL PROTECTED]> wrote: > Dear All, > > > I have a requirement to implement CBWFQ/LLQ matching > on EXP bits on a 6500 with SUP720-3BXL. > > Since the "priority" command is not supported within a policy-map, > I am wondering if this can be achieved using "wrr-queues". > > This is the failure message when I apply the service-policy: > > 6500(config-if)#service-policy input CORE-THREE-CLASS > priority command is not supported in input direction > for this interface configuration failed!
above you try using priority in ingress direction which is not supported generally. Second problem in your case will be that 6500/7600 LAN cards does not support CBWFQ like 7200/7301 etc. You must use L2 QoS, see "Quality of Service on Cisco Catalyst 6500" http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper0900aecd803e5269.html David > > This is for a WS-X6704-10GE linecard with supports 1p7q8t. > > I will be really grateful for input or pointers about this. > > Thanking in you advance. > > > Regards, > > > > Zahid > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
