Hi all,
Has anyone had experience bringing up a trunked LACP bundle between a
3750 and an Enterasys DFE Platinum (in a N7 chassis) ? If I configure
the link as Access ports, everything works fine. But when I try to
configure the LACP bundle as a trunk port, the Port-Channel comes up and
everything works fine for about a minute before I get a "channel
misconfig" error and the member ports are error disabled.
Both sides have VLAN 1 as the default VLAN. I am egressing the required
VLANs from the Enterasys, and the same VLANs are in the allowed VLANs
list on the 3750.
I am hoping there is a simple gotcha I've missed here...
Marc.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
