I did a quick search, but couldn't find any reports of this error, or whether it requires replacement or not. A search revealed some matches, but none referencing inline power problem. Has anyone seen this before?
Jun 12 09:42:21.655 PDT: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 6 is experiencing the following error: Inline Power Module - PS 3.3V bad Here's output from show mod with relevant info: Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 6 48 48-port 10/100 RJ45 Ethernet Module WS-X6148A-45AF xxxxx Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 6 0019.554e.3910 to 0019.554e.393f 4.0 8.4(1) 8.5(0.46)RFW Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 6 IEEE Voice Daughter Card WS-F6K-48-AF SAL1028URS7 2.0 Ok Mod Online Diag Status ---- ------------------- 6 Minor Error -- Eric Cables _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
