There's no tool that I know of There are some areas of the configuration that simply cant be ported because of platform differences, while others are identical. For example, interface configurations are fundamentally different, while ACLs and route statements will be identical. Also, a big factor in converting configs would be source and dest versions (a 2.x FWSM conf is a lot farther from an ASA conf than a 3.x FWSM conf).
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rossella Mariotti-Jones Sent: Thursday, June 19, 2008 4:26 PM To: [email protected] Subject: [c-nsp] moving from FWSM to ASA Hello all, does anybody know of a tool that we can use to convert the configuration from FWSM to ASA? Thanks in advance. *** Rossella Mariotti-Jones [EMAIL PROTECTED] Network Analyst, SS - SPIR - IT TAC desk 503-589-7775 **** PRIVILEGED AND CONFIDENTIAL COMMUNICATION **** This electronic transmission, and any documents attached hereto, may contain confidential and/or legally privileged information. The information is intended only for use by the recipient named above. If you have received this electronic message in error, please notify the sender and delete the electronic message. Any disclosure, copying, distribution, or use of the contents of information received in error is strictly prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
