Hello,
We;'re trying to setup a network with 2 Cisco ASA (5510) and 2 Cisco
2950 switches. In event that any firewall kaputs, the other will take
over (we havent decided on active/active or active/standby configuration
yet). Also, all the servers on the internal network are performing
"network teaming" , so even if one switch dies, traffic will pass
through other traffic
FW1 -- SW1 --|
| |
FW2 -- SW2 --|
My question is, what if for some freak reason FW1 AND SW2 dies
simultaneously. In this scenario, network is totally down unless we do
some manual recabling. I understand that this might never ever happen,
but i would like to see how i can plan for this, because this network is
to be deployed in a remote location, where there might not be any IT
people around to assist.
Appreciate any advise, or ideas on this. Thanks!
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
