Use multiple statements within a single crypto map configuration:

crypto map iosvpn 5 ipsec-isakmp
 set peer X.X.X.X
 set security-association lifetime seconds 28800
 set transform-set aes-sha
 match address vpn_XXXgard5
 reverse-route
crypto map iosvpn 15 ipsec-isakmp
 set peer X.X.X.X
 set security-association lifetime seconds 28800
 set transform-set aes-sha
 match address vpn_XXXgard15
 reverse-route
crypto map iosvpn 25 ipsec-isakmp
 set peer X.X.X.X
 set security-association lifetime seconds 28800
 set transform-set aes-sha
 match address vpn_XXXgard25
 reverse-route
crypto map iosvpn 35 ipsec-isakmp
 set peer X.X.X.X
 set security-association lifetime seconds 28800
 set transform-set aes-sha
 match address vpn_XXXgard35
 reverse-route
crypto map iosvpn 100 ipsec-isakmp dynamic dyn


On 7/7/08 10:52 AM, "Ge Moua" <[EMAIL PROTECTED]> wrote:

> Yes, use subinterfaces:
> interface GigabitEthernet0/0.1
> interface GigabitEthernet0/0.2
> interface GigabitEthernet0/0.3
> ++
> 
> Then attach different crypto-map per sub-interface.  We are doing this.
> 
> Regards,
> Ge Moua | Email: [EMAIL PROTECTED]
> 
> Network Design Engineer
> University of Minnesota | Networking & Telecommunications Services
>  
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Everton Diniz
> Sent: Monday, July 07, 2008 9:46 AM
> To: cisco-nsp
> Subject: [c-nsp] 2800 for VPN Server site-to-site and remote access
> 
> Hi all,
> 
> Is it possible to use 2821 for vpn concentrator doing both site-to-site and
> remote access connections in only one interface?
> 
> Hi have 2 crypto map´s, but the interface accept only one.
> 
> crypto dynamic-map vpnmap 10
>  set transform-set transfervpn
>  reverse-route
> 
> crypto map L2L 11 ipsec-isakmp
>  set peer 200.200.200.1
>  set peer 200.200.201.1
>  set transform-set L2L
>  match address 120
> 
> interface GigabitEthernet0/0
>  ip address 200.100.100.1 255.255.254.0
>  duplex auto
>  speed auto
>  crypto map onsaescom
> end
> 
> Anybody use the 2800 for this purpose?
> 
> Tks all.
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


 
The information transmitted is intended only for the person or entity to which 
it is addressed and may contain confidential and/or privileged material. Any 
review, retransmission, dissemination or other use of, or taking of any action 
in reliance upon, this information by persons or entities other than the 
intended recipient is prohibited.  If you received this in error, please 
contact the sender and delete the material from any computer.

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to