> > i'm not TAC & don't take what i say as a "formal" reply. TAC will > presumably also be getting back to you.
I understand and I appreciate your helping mind:) > > there are a few things that i can think might be a possible cause: > > 1. per > http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/relea se > /12.1_19_ea1/configuration/guide/swspan.html > make sure the destination SPAN port doesn't belong tin a SPAN source VLAN. It might be what we were missing. We will share our feedback, as we did not put source and destination ports in different VLAN. > it isn't clear if you're running a .1q trunk between the switches or if > the source is an 'access' port. > We have configured dot1q trunk link > 2. you've explicitly configured some jumbo frames on both switches. are > you attempting to SPAN frames >1524 bytes on a 10/100 interface? > Yes, But it's Gigabit port. > > cheers, > > lincoln. Cheers, Mustafa _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
