On Tue, 8 Jul 2008, Mihai Tanasescu wrote:
I have just started studying multicast for accomplishing a task that I've
been giving and don't know where / what I am doing wrong.
My setup is something like the following:
RP ---> Router A --- iBGP ---> Router B --- eBGP --> Router C (vrf-lite)
between Router B and Router C I have 5 links (4 are vrf-lite in Router C, the
5th is in the global table and use for MPLS ldp).
I have configured on each router:
ip multicast-routing (in C for example for both global and VRF) , ip pim
sparse-dense-mode on interfaces and the RP.
If I connect with a cable in Router A I can view the multicast stream.
Same if I connect in Router B.
But in Router C it doesn't work (neither in the global table, neither in the
VRFs from vrf-lite implementation).
Can you help with an advice or what I could be doing wrong ? (I'm just a
beginner/newbie when it comes to mcast)
Do you have an RP on the right-hand-side of your diagram and do you have
MSDP peering running between the left and right to distribute source info?
Antonio Querubin
whois: AQ7-ARIN
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
