I'm working with a customer on a network redesign. The plan is to use
7206/NPE-G1s as PE routers and 6509/SUP2 as P routers. The SUP2s
would only need to switch the MPLS tags they won't need to do anything
special. The 7206s will handle the grunt work of maintaining per VRF
routing tables and adding/removing MPLS tags.
Can the SUP2 handle this or will I need to go to SUP720/3BXL? I could
just dumb the 6509s down and run everything L2 with dot1q VLANs but
looking to the future MPLS would be nice.
The layout would be
CUST <--T1/IP--> [7206] <--GigE/MPLS--> [6509] <--GigE/MPLS--> [6509]
<--GigE/MPLS--> [7206] <--T1/IP-> CUST
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
