I think I must need the metro switch for this: Take a look at "Configuring the PE Switch B" at this url:
http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/release/12.1_14_ax/configuration/guide/swiprout.html#wp1258623 On Wed, Jul 9, 2008 at 10:44 AM, Marko Milivojevic <[EMAIL PROTECTED]> wrote: > I think that you need to use SVI's (interface vlan xxx) combined with > trunks on these boxes. They don't support subinterfaces, as far as I > recall. > > On Wed, Jul 9, 2008 at 15:35, Nick Griffin <[EMAIL PROTECTED]> > wrote: > > I am thinking that I should be able to create sub-interfaces on these > > devices to be used for multiple vrf's, but maybe I'm confused. I have > some > > routed core/dist links I need to maintain as well as extended some > services > > via VRF Lite. I have tried ip serv, adv ip serv, etc and I am still > unable > > to configure a subinterface. Am I missing something, does this require a > > 3750E? > > > > interface fas 1/0/1 > > no switch > > ip address 1.1.1.1 255.255.255.0 > > > > int fas 1/0/1.100, etc > > ip vrf VRF1 forwarding > > ip address 2.2.2.2 255.255.255.0 > > > > Hope this makes sense, thanks in advance, > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
