Hi Robert,
I didn't read anything about this but if i look at some others chassis
like a 6509 the in- and outlet temps are higher but the asic temps are
31C. Could it be the fan-tray of a 6504-e isn't powerfull enough to cool
the chassis?
Thanks,
Koen
Robert E. Seastrom wrote:
Koen <[EMAIL PROTECTED]> writes:
We got 2 WS-C6504-E chassis both with 1 sup 7203CXL and 2
WS-X6748-GE-TX and we see that the asic temperature is always higher
then 40C which is the max operational temperature according to the
docs.
The max operational temperature quoted in documentation is almost
always ambient (or inlet) temperature, not the temperature of any
particular hot spot on the board. At 30c inlet, you're well within
spec. Is there something you have read that leads you to believe
things are different in this case? Can you point me there if so?
-r
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
