> Maybe it's the fact that these are sup720-3cxl-10ge , with X2 modules > installed (which also seem to get hot, 41C), and this packed in a small > chassis....
Check CISCO-ENTITY-SENSOR-MIB::entSensorThresholdTable. Looking at some 720C-10GE's, the minor threshhold for the 'asic-#' sensors are 90-95C with criticals at 105-110C. Your inlet seem to be high, but no need to be concerned about those asics temps. Just checked a lightly-populated 9-slot 720C-10GE, w/ inlet at 23C and the sensors in question are at 34C, 49C, and 51C. Comparing similarly configured (and situated) 4 and 9 slots, all of them seem consistent, so no need to be suspect of the smaller chassis. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
