Not much to offer once they down. I did move the link to another free port on the box and thing seem to stay. Heck, may be time for a RMA and a due IOS upgrade ;-)
Regards, Loc Pham, # 17030 R/S "We switch our network dedicately :One packet at a time... " -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Friday, July 11, 2008 7:04 AM To: Pham, Loc Cc: Cisco NSPs; [EMAIL PROTECTED] Subject: Re: [c-nsp] Link flap on 3550-12G What's the other end look like? Link-flap errors like that are generated when a link goes up/down more than 10 times in 60 seconds. Entirely possible that you have an issue with the remote end, or physical plant. -- robbie "Pham, Loc" <[EMAIL PROTECTED] ctr.org> To Sent by: "Cisco NSPs" cisco-nsp-bounces <[email protected]> @puck.nether.net cc Subject 07/10/2008 10:54 [c-nsp] Link flap on 3550-12G AM Greetings, Time for RMA ? the uplink is basic P2P L3 routing .... 1y40w: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to down 1y40w: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to up 1y40w: %PM-4-ERR_DISABLE: link-flap error detected on Gi0/7, putting Gi0/7 in err-disable state 1y40w: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to down 1y40w: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/7, changed state to down 350par1-DIST2-R2# sh ver | i IOS IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(13)EA1a, RELEASE SOFTWARE (fc1) 350par1-DIST2-R2# Regards, Loc Pham, CCIE # 17030 - Sr. Network Staff, IT Network Architecture & Security, UCSF Medical Center Office 415-353-4492 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
