Hi everyone, I'm currently working on some testing for a potential project that would involve a number of remote sites that require encrypted traffic to flow between them, as well as them performing BGP with a number of upstreams, and IX's.
The current router of choice (before the IPSec VPN's were thrown in) was the 7[23]00 with the NPE-G2. The current design encompases running GRE tunnels (for the IGP to work as we wish). With no hardware acceleration, the routers processors max out about 25Mbps. With the SA-VAM2+ this increases to about 60Mbps, however is no where near the level I would have expected unfortunately. Can anyone with any experience of using the SA-VAM2+/ anyone who has any extra thoughts on how to improve the throughput? These routers aren't running any ACL's at present, have a couple of OSPF processes, and a couple of BGP sessions with only a few routes. Any thoughts much appreciated, Thanks, _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
