http://www.cisco.com/en/US/prod/collateral/routers/ps341/prod_presentation09186a008009184d.pdf
Regards, Mathias From: Andrey Oleinik <[EMAIL PROTECTED]> To: Garry <[EMAIL PROTECTED]> Cc: "[email protected]" <[email protected]> Date: 16.07.2008 15:00 Subject: Re: [c-nsp] bandwidth points table (former Three STM-1 on one Cisco 7200vxr-npeG1) Gentlemen, Saying about Cisco it's very new and interesting matrices for me (I mean bus/interface bandwidth points). Is this info available publicly? Thank U -- Respect, Andy Oleynik ... andyo> > Is it recommended to run three STM-1 (PA-POS-1OC3) on a single andyo> > Cisco700vxr with NPE-G1 ? andyo> andyo> Technically, it is supported, as each of the two buses have 600 andyo> bandwidth points, with an STM-1 interface taking up 300. Question andyo> is andyo> whether it might be recommendable to get a second router for andyo> redundancy andyo> reasons, e.g. if you are terminating several uplinks with that one andyo> router. If so, I'd advise against doing it all on one router ... ... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
