Hi all, After upgrading a SUP720-3BXL to SRB3, CPU utilization has gone up quite a bit. The CLI is extremely slow and the input lag is awful.
The process eating up most of the CPU is the "BGP Event" which seems to run quite often and every time it does, I get the following messages from 'debug ip bgp event': Jul 18 20:27:02.430 MET-DST: EvD: charge penalty 500, new accum. penalty 3447, flap count 40165 Jul 18 20:27:02.430 MET-DST: EvD: charge penalty 500, new accum. penalty 3947, flap count 40166 Jul 18 20:27:02.430 MET-DST: EvD: charge penalty 500, new accum. penalty 4447, flap count 40167 EvD isn't enabled on the box and searching CCO for it shows me an interface ought to be involved in it if it was: 00:07:17:EvD(Ethernet1/1):charge penalty 1000, new accum. penalty 1000, flap count 1 But I have no interfaces flapping and I am puzzled why I am seeing these messages when debugging BGP events. What would be the cause of these messages and is it likely they are responsible for the high CPU utilization? Thanks in advance, -- Regards Christian Bering _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
