Hello Gert, Thanks for the reply. To answer your questions, yes I have ip routing on the router, as all the other stuff is working. As to the IOS version on the RSM, it's:
IOS (tm) C5RSM Software (C5RSM-IK9O3SV-M), Version 12.2(46a), RELEASE SOFTWARE (fc1) Also as a follow-up on the situation, I tore down the Multilink bundle, and took a single T1, and put it loaded the /30 that was on the Multilink interface on it. When I did that the single T1 line came up, and routed perfectly. So it's very much (be it a bug, or whatever) an issue with using Multilink. Just for info sake, the IOS on the 6509 is: IOS (tm) s222_rp Software (s222_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF14, RELEASE SOFTWARE (fc1) I was going to just use CEF with per-packet across the lines to give them full utilization, but on the FlexWan controller, when I go into the interface config's and try and set that up, apparently the ONLY option is per-destination. This is the older FlexWan board, so it's a WS-X6182-2PA card. Do you or heck does anyone know if I replaced the controller with a 6582 would I be able to use per-packet on that? Amazing this lil shared T1 project has been such a pain in my side, but guess some days ya just can't win! --- Howard Leadmon > -----Original Message----- > From: Gert Doering [mailto:[EMAIL PROTECTED] > Sent: Saturday, July 19, 2008 2:43 PM > To: Howard Leadmon > Cc: [email protected] > Subject: Re: [c-nsp] Help with multilink ppp, routing not working > correctly.. > > Hi, > > On Fri, Jul 18, 2008 at 07:18:34PM -0400, Howard Leadmon wrote: > > Location-B: Cat5500 RSM > > a) what software version is on the RSM? > b) do you have "ip routing" in your config? > > gert > -- > USENET is *not* the non-clickable part of WWW! > > //www.muc.de/~gert/ > Gert Doering - Munich, Germany > [EMAIL PROTECTED] > fax: +49-89-35655025 [EMAIL PROTECTED] > muenchen.de _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
