Dan, I've done this with 7960's, not a 7961. Have a look at the process for conversion of the phones, here it is for the 7960 couldn't find the same for a 7961: http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a 0080094584.shtml
http://tinyurl.com/23tw2c Hope it helps, David -- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan Letkeman > Sent: Monday, July 21, 2008 2:06 PM > To: [email protected] > Subject: [c-nsp] 7961G won't boot > > Hello, > > I have a 7961G that won't boot up. It powers on via poe, shows the > cisco splash screen with the checkmark in the bottom left corner, then > shows the upgrading screen for a few seconds, then says error on the > upgrading screen, then goes back to the cisco splash screen and there > is a circle with a dot in the middle of it on the bottom left corner. > > Is there anyway to fix this? > > Thanks, > Dan. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
