Hello folks, Please pardon me asking what I'm sure has been answered before. I've looked through the archives and the Cisco site, but I'm still confused about what I need to do.
I have a client who's Cisco 1841 CPE router needs to simply prioritize SIP traffic to and from a specific VoIP proxy. Let's say the VoIP proxy is 209.120.xxx.xxx The customer's current config on their 1841 is below. Can someone give me an idea of how I can accomplish this? Remember, I just basically need priority queuing of any traffic to and from that VoIP proxy listed above Thanks very much for any help! -Nick Voth ---------Customer's CPE config------------>>>> interface FastEthernet0/0 ip address 67.101.xxx.xxx 255.255.255.248 duplex auto speed auto no keepalive ! ! interface Serial0/0/0 no ip address encapsulation frame-relay IETF no ip mroute-cache service-module t1 timeslots 1-24 service-module t1 fdl both frame-relay lmi-type ansi ! interface Serial0/0/0.1 point-to-point frame-relay interface-dlci 16 ppp Virtual-Template1 ! interface Virtual-Template1 ip address negotiated ppp chap hostname xxxxx ppp chap password 7 01465656080E535773 ppp ipcp dns request ppp ipcp route default ppp ipcp address accept ---------- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
