Justin,
On Jul 25, 2008, at 5:32 PM, Justin Shore wrote:
Does anyone have any suggestions for a Ethernet to DS3 or OC3
bridge? I need multiple DS3 support for the longer-term but a
single DS3 would work. I was looking at the Overture ISG 45 but it
appears to only support a single DS3.
http://www.overturenetworks.com/products/isg_45.htm
I couldn't find a DS3 bridge for RAD but I think the Optimux-155 is
a OC3 bridge.
Basically I need an inexpensive way to transport Ethernet over TDM
links for an Ethernet venture. Our transport provider can't do
Ethernet at this point in time and they've suggested DS3 in the mean
time. DS3 interfaces are very expensive for 7200s. I'm thinking a
lower cost DS3 to Ethernet bridge of some sort. Suggestions?
If you want more DS3 ports, for N x DS3, perhaps an Overture ISG-2200
or ISG-5000:
http://www.overturenetworks.com/products/isg_2200.htm
http://www.overturenetworks.com/products/isg_5000.htm
Both are "modular" chassis. The 2200 supports 1 "option slot" you can
install a 3-port DS3 card into to start with, then later pull it out
an insert a 1-port OC-3c into. The 5000 is a 4-slot chassis. Both
chassis work with the same modules.
-shane
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
