Hi everyone. Ran into a little snag this afternoon when I needed to
police layer 2 customers on a single port in a similar fashion to the
way we do it on the 3550-24s. Normally we would we create the aggregate
policer, use a class map that matches on vlan id and another one that
matches any ip per customer...we combine these under a single policy-map
and apply it to the interface.
When trying this similar process on the 3750, we noticed that we aren't
able to match on vlan:
copsw01(config)#class-map match-all ARPI3-IP-Trunk
copsw01(config-cmap)#match ?
access-group Access group
input-interface Select one or more input interfaces to match
ip IP specific values
So now we're left wondering how can we have a trunk port police
invididual vlans if the option is not there to choose? BTW, the version
of IOS we're using is c3750-ipbasek9-mz.122-25.SEE2.
Thanks.
Jose
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
