Jose, Take a look at vlan-based QOS http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/relea se/12.2_44_se/configuration/guide/swqos.html#wp1703760
Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jose Sent: Saturday, July 26, 2008 16:00 PM To: Cisco Subject: [c-nsp] Policing individual vlans per port on 3750 (non metro) Hi everyone. Ran into a little snag this afternoon when I needed to police layer 2 customers on a single port in a similar fashion to the way we do it on the 3550-24s. Normally we would we create the aggregate policer, use a class map that matches on vlan id and another one that matches any ip per customer...we combine these under a single policy-map and apply it to the interface. When trying this similar process on the 3750, we noticed that we aren't able to match on vlan: copsw01(config)#class-map match-all ARPI3-IP-Trunk copsw01(config-cmap)#match ? access-group Access group input-interface Select one or more input interfaces to match ip IP specific values So now we're left wondering how can we have a trunk port police invididual vlans if the option is not there to choose? BTW, the version of IOS we're using is c3750-ipbasek9-mz.122-25.SEE2. Thanks. Jose _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
