That dir nvram: will tell you how much nvram you actually have, I believe 64K. sh run should display how large the configuration is. "service compress-config" will compress the config so that it fits in the limited nvram you have, but boot times will be slowed since the config must be decompressed at startup.
My 3560 is using 30K for config, but it is a very basic config. And primarily routed interfaces. I also have 512K of nvram. David -- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Alex Howells > Sent: Friday, July 25, 2008 8:37 AM > To: [email protected] > Subject: [c-nsp] nvram writing config issue > > Not seen this one before, thought I'd ask the oracles what the fix is? > > Directory of nvram:/ > > 28 -rw- 31882 <no date> startup-config > 29 ---- 3647 <no date> private-config > 1 ---- 12 <no date> persistent-data > > switch#write mem > Building configuration... > > % Warning: Saving this config to nvram may corrupt any network > management or security files stored at the end of nvram. > Continue? [no]: > > If you don't save the config -- > > % Configuration buffer full, can't add command: interface > FastEthernet0/37 > %Aborting Save. Compress the config.[OK] > > If you do save the config -- > > Jul 25 13:35:39.242 BST: %SYS-4-CONFIG_NV_OVERRUN: Non config data > present at the end of nvram is corrupted > > Switch is a WS-C2960-48TT-L running 12.2(25)SEE4. > > Thanks, > Alex > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
