During our ipsec testing (best case scenario, back to back encrypted tunnel, adjusted mss of 1436bytes) we were pushing about 20Mbps with ftp traffic. Adjusting MTU down to 64bytes, I believe we were, understandably so, only reaching about 6-8Mbps. Still more than enough to saturate most DSL, and some cable connections. The router CPU was of course at or near maxed out during both tests. CBWFQ also held out extremely well in the tests, although i cannot remember specifics, just that the call did not drop or get choppy. I think the throughput speeds were similar.
The 871 is our standard remote client hardware VPN solution, and we haven't had any issues yet. If you aren't maxing out the CPU, you're probably not having a throughput issue. On Tue, Jul 29, 2008 at 2:46 PM, Bryan Welch <[EMAIL PROTECTED]> wrote: > Greetings, anyone have any 800 series routers deployed to remote sites > to terminate vpn tunnels? We have an 871 deployed to a remote > location/country that we are experiencing some throughput issues with. > > > > Router seems to handle the traffic just fine, no errors what so ever. > > > > > > > > TIA, > > > > > > Bryan > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
