wccp should work..google around for some example configs, there is plenty around, it is pretty straightforward..it is the overall solution that you will need to decide on what will be best fit for your problem/environment
wccp on router > gre tunnel > squid box > auth to radius etc, whatever or you may want to look into captive portals On Wed, Jul 30, 2008 at 1:34 AM, Brett Looney <[EMAIL PROTECTED]> wrote: > > Cust has access points open to public, they need to hijack the > > web requests and take them a web page where they enter a security > > code, and then allow them... So, I need to integrate this with > > some form of ACS (still finding out) and a web server... > > You might also check out IP auth-proxy: > > http://www.cisco.com/en/US/partner/products/sw/secursw/ps1018/products_confi > guration_example09186a0080094655.shtml<http://www.cisco.com/en/US/partner/products/sw/secursw/ps1018/products_configuration_example09186a0080094655.shtml> > > B. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
