On Sat, Aug 02, 2008 at 02:20:49PM -0500, Richard A Steenbergen wrote: > Is there a way to SNMP query the mac-address-table on a 6500/7600 sup720 > running IOS (SXF, SRC, whatever)? There are some docs on the subject for > lower end catalysts but I'm not getting any data under dot1dTpFdbTable or > anything else useful from the bridge mib. > > I'll also settle for alternative ways to solve my problem... I'm trying to > identify the actual physical port that a specific IP address (or mac > address, since I already have that) is being sent to, when that IP address > is routed via a L3 vlan iface that is trunked via multiple switchports. > Querying the mac-address-table seems like the easiest way, except I can't > seem to make it work via snmp.
Sigh nevermind, found the problem. Seems you have to use a community of [EMAIL PROTECTED] to access the bridge mib. -- Richard A Steenbergen <[EMAIL PROTECTED]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
