Yep I have also used softflowd which is essentially the same thing. SPAN the port and away you go she generates netflows for you.
http://www.mindrot.org/projects/softflowd/ Cheers, Aaron. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stig Johansen Sent: Monday, August 04, 2008 2:46 PM To: [email protected] Subject: Re: [c-nsp] router as bridge for netflow exports Setup a sniffer and use netflow export on it. See f.ex. http://www.ntop.com/nProbe.html Best regards, Stig Meireles Johansen -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Letkeman Sent: 3. august 2008 18:19 To: [email protected] Subject: [c-nsp] router as bridge for netflow exports Hello, I'm wondering if it should work to setup a router as a bridged device to put in between a couple of switches to do some netflow exports? Or is there a better way to get this kind of data from a link? Thanks, Dan. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 270.5.12/1589 - Release Date: 8/3/2008 1:00 PM _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
