Your answer is Yes, logically you can have graceful restart on a router that does not have multiple RSP, but you will need to have the neighboring router to at least have the NSF/SSO feature ....
Take a look at this link. http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_grac e_rstrt_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1088518 HTH Hash -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Tinka Sent: Monday, August 04, 2008 2:05 AM To: [email protected] Subject: Re: [c-nsp] LDP Graceful restart On Thursday 31 July 2008 20:25:15 Monika M wrote: > Does the graceful restart feature for LDP works in a single route > processor configuration? (similar to Routing > protocols?) We have seen it work as desired between multiple 7206-VXR units (which are, by no means, hardware/distributed routing platforms, but for all intents and purposes, have a single control plane). Here's some log output: Jul 27 00:26:41.874 MYT: %LDP-5-GR: GR session 192.168.0.1:0 (inst. 13): interrupted--recovery pending We have a couple of Junipers (M-series) that have LDP configured for GR, but those have been stable so I have no logs to offer :-). Cheers, Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
