Sure is.. it's called a cable, and runs from a port in your vlan 1 to a port in another vlan which you configure on your ACE-module. :)
Best regards, Stig Meireles Johansen -----Opprinnelig melding----- Fra: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] På vegne av Teller, Robert Sendt: 4. august 2008 17:49 Til: cisco-nsp@puck.nether.net Emne: [c-nsp] Adding vlan 1 to vlan-group Is there a configuration option that will allow me to add vlan 1 to a vlan group to be used with an ace module? When I try to do it I am receiving the following error message. svclc vlan-group 111 1 Vlan 1 can not be a secure vlan I am doing this for a temporary migration reasons. ######################################################### The information contained in this e-mail and subsequent attachments may be privileged, confidential and protected from disclosure. This transmission is intended for the sole use of the individual and entity to whom it is addressed. If you are not the intended recipient, any dissemination, distribution or copying is strictly prohibited. If you think that you have received this message in error, please e-mail the sender at the above e-mail address. ######################################################### _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/