Hi all, I have a strange nat issue here, it seems not to work as it should be.
#sh ip nat translations <empty> Then I tried to.. # no ip nat inside source list 13 pool nat_08 overload %Dynamic mapping in use, cannot remove # no ip nat pool nat_08 1.1.1.13 1.1.1.13 netmask 255.255.255.252 %Pool nat_08 in use, cannot destroy Why I can't remove those lines? I tried too to do a "clear ip nat translations" and "ip clear nat translations forced" without a success. I removed "ip nat inside" and "ip nat outside" commands from interfaces, with no effect at all, same result. Now, I also load a new "ip nat inside" rule over a new "ip nat pool" rule and I just see misses in my "sh ip nat stats", and "ip nat inside" and "ip nat outside" are correct! I will review "open caveats" for the release but in the mean time if anyone in the list can with me a hand i will be really appreciated. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
