If this is just a satellite location, I would try to avoid BGP unless absolutely necessary. Maybe OSPF can meet your needs for this and then you can inject routes as needed.
Chris ----- Original Message ----- From: "Alex Burba" <[EMAIL PROTECTED]> To: "Joe Loiacono" <[EMAIL PROTECTED]> Cc: [email protected] Sent: Monday, August 11, 2008 2:35:14 PM GMT -08:00 US/Canada Pacific Subject: Re: [c-nsp] Good 10GE Metro switch It will do fine until you won't try to upload full view or try to serve more then 10-15 downlinks, i suppose. 2008/8/12 Joe Loiacono <[EMAIL PROTECTED]> > We have a requirement for about 2+ GE between two metro locations. I'm > looking at the 3750-E with 2 X2 10GE uplink ports. I would use the > 10GBASE-ER X2 Transceiver Module for the distance. Actually the distance > is about at the 40 Km limit - but that's another question. Want to do BGP > with a limited set of users at the remote location. > > Assuming the distance is OK, does this switch make sense? Recommend > another? > > Thanks, > > Joe > > PS - Should I worry (alot) about being at or slightly above the 40 Km > distance? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
