Use a PCMCIA to CF adapter and load the image using your PC - we used
these extensively and they worked well and were much cheaper than the
flash cards
plus with a laptop we could copy directly onto the CF no need for
XMODEM/TFTP
Church, Charles wrote:
Does anyone know if it's possible to use XMODEM from a 6500 Sup2's SP
ROMMON to copy a native mode image (assume 12.2SX) and boot it
successfully? I know it would take forever, just trying to update some
documentation. All the docs on CCO seem to indicate that it can be used
to copy a CatOS image and boot it. Just wondering if it's possible.
Don't have a local 6500 to test it on.
Thanks,
Chuck
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
