Thanks for the reply Phil. It looks as if you're right. No mention of TopTalkers in the CLI.
We'll maybe have to look at implementing this upstream or plan an IOS upgrade on the Cat's. Thanks again, Mark -----Original Message----- From: Phil Mayers [mailto:[EMAIL PROTECTED] Sent: 18 August 2008 22:33 To: Mark Tohill Cc: [email protected] Subject: Re: [c-nsp] Netflow TopTalkers and Modular 12.2(18)SXF4 On Mon, Aug 18, 2008 at 05:12:46PM +0100, Mark Tohill wrote: >Hi, > >Does anyone have experience of configuring Netflow Top Talkers on >Modular 12.2SX images? I thought netflow top-talkers was an SXH feature? > >We are running modular 12.2(18)SXF4 on Sup720, MSFC3, PFC3 on 6509-E, as >below: > >sh ver >Cisco Internetwork Operating System Software >IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-VM), Version >12.2(18)SXF4, RELEASE SOFTWARE (fc1) ><..output ommited...> >disk0:/sys/s72033/base/s72033-advipservicesk9_wan-vm ><..output ommited...> Ok - but what are you asking? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
