Besides documenting config changes, can rancid perform a tftp backup of
router / switch startup configs, or integrate with some other software to
pull down the config file if a change is detected?
----- Original Message -----
From: "Lamar Owen" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, August 19, 2008 8:42 AM
Subject: Re: [c-nsp] OT: network inventory
On Tuesday 19 August 2008 08:13:28 [EMAIL PROTECTED] wrote:
Anybody familiar with (freeware/shareware) tools for a network
inventory? Install-base is 100% cisco.
Are there other utilities around that would scan the collected
configurations and read relevant info (descriptions, ip add, link
bandwidth etc)?
I use OpenNMS, which is a full bore network management system. Has great
autodiscovery, and reads what it needs to know via SNMP. Can do layer 2
link
detections and paths.
Doesn't pull in configs; rancid does that quite well.
--
Lamar Owen
Chief Information Officer
Pisgah Astronomical Research Institute
1 PARI Drive
Rosman, NC 28772
http://www.pari.edu
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
